The water level in an open well can change in response to deformation of the surrounding material, either because of applied strains (tidal or tectonic) or surface loading by atmospheric pressure changes. Under conditions of no vertical fluid flow and negligible well bore storage (static-confined conditions), the sensitivities to these effects depend on the elastic properties and porosity which characterize the surrounding medium. For a poroelastic medium, high sensitivity to applied areal strains occurs for low porosity, while high sensitivity to atmospheric loading occurs for high porosity; both increase with decreasing compressibility of the solid matrix. These material properties also influence vertical fluid flow induced by areally extensive deformation and can be used to define two types of hydraulic diffusivity which govern pressure diffusion, one for applied strain and one for surface loading. The hydraulic diffusivity which governs pressure diffusion in response to surface loading is slightly smaller than that which governs fluid flow in response to applied strain. Given the static-confined response of a water well to atmospheric loading and Earth tides, the in situ drained matrix compressibility and porosity (and hence the one-dimensional specific storage) can be estimated. Analysis of the static-confined response of five wells to atmospheric loading the Earth tides gives generally reasonable estimates for material properties. ¿ American Geophysical Union 1989