Nontransform offsets are a fundamental aspect of the offset geometry exhibited along the mid-oceanic ridge system, independent of spreading rate. Along the slow/intermediate opening (<40 mm/y full rate) Mid-Atlantic Ridge these offsets of the ridge axis range in length from less than 10 km to approximately 30 km and vary in age offset from 0.5 to 2.0 m.y. The variable morphotectonic geometries associated with these discontinuities indicate that horizontal shear strains are accommodated by both extensional and strike-slip tectonism and that the geometries are unstable in time. In many cases, there appears to be an evolutionary relationship between transform fault boundaries and nontransform offsets as the result of prolonged differential asymmetric spreading between adjoining ridge segments. The finite element method is used to study the complex stress field associated with these small-offset discontinuities of ridges with slow (30 mm/y) and fast (100 mm/y) total opening rates. A plane stress plate model examines the variation in the horizontal tectonic stress field produced by offsets with different lengths and changes in the ratio of a ridge-normal tensile stress resisting plate separation to a shear stress resisting relative plate motion along the discontinuity. The predicted fault patterns based on the calculated stress field are compared with seafloor observations in terms of the morphotectonic patterns and evolution of nontransform offsets.

For a slow spreading rate, the analysis shows that all structural geometries observed can be modeled by a range of offset lengths (5, 10, 20, 30, and 40 km) and by a ridge-normal stress 3 to 5 times greater than the discontinuity shear stress. These findings suggest that nontransform offsets are zones of mechanical weakness relative to the surrounding lithosphere. An offset length between 10 and 20 km is predicted to be the threshold length for maintaining a transform fault geometry. As inferred from ridge axis morphology, there seems to be a strong link between the magnitude of the stress ratio and the time varying magmatic activity along and between ridge segments. While our models are consistent with a weak discontinuity shear stress relative to the ridge-normal stress to explain the geometries of nontransform offsets of slow-spreading centers, a weaker ridge-normal stress to discontinuity shear stress most closely models the development of an overlapping spreading center geometry, the distinctive geometry of nontransform offsets of spreading centers opening at fast rates. This difference is attributed to magma supply along-axis, relatively continuous for fast-spreading centers and intermittent for slow-spreading centers, and a preexisting zone of mechanical weakness linked to the evolution of nontransform offsets from transform faults on slow-spreading centers. ¿ American Geophysical Union 1993